The control panels of Hengjin Power standard generator sets are based on Bernini intelligent control modules BE24 or BE2K; with option of BE2K-PLUS for telecom applications. Deepsea, Woodward and Comaq control modules are also available as options.

Control Panel Bsed on BE24

The Be24 includes all functions needed to control and protect a generating set. The Be24 is a compact 96x96 DIN module featuring 6 membrane-type push buttons, 2 LEDs, a 4 digit display, 5 static outputs, 9 inputs, and a 3-position (30A rated) Key-switch for manual start.

Key Features

• DIN 96x96, temperature range -30°/+70° C
• 6 display menu: A-V-RPM-Hz-Vdc-h
• 6Vdc up to 36Vdc supply, 30A key-switch
• 4 digit display, 2 LEDs, 6 push-buttons
• Manual and Automatic operating modes
• Interfaces Pick-up or W
• 600 Vac / 1000 Aac display range
• Automatic Periodic TEST up to 99 days
• 30 programmable parameters & settings
• In-field calibration facilities for R.P.M./V/A/Hz
• 16 alarm messages, 10 operating messages
• 3 years full warranty, cost effective

Control Panel Bsed on BE2K

The Be2K is a high performance 3-phase A.M.F / Generator controller and monitoring system. It displays all parameters involved in the automation of a Generator. A serial interface Rs232 or RS485-MODBUS, is provided for Modem and Remote control.This software allows you to program, monitor and calibrate measurements. The Be2k can be easily controlled by Mobile Phones, using the Be15 option. The Be15 also provides 15 additional programmable relay outputs. A Windows XP (*) compatible control and monitoring software is provided.

Key Features

◆ Powerful set of 70 input-output lines
◆  80 programmable parameters & real-time clock
◆  3-Phase Generator & Mains monitoring
◆  RS232/485 that includes MODBUS
◆  Local or Remote operating modes selection
◆  21 Operating and 60 Alarm Messages
◆  Event Logging, scheduled maintenance programs
◆  Programmable timeout for RENTING applications

Front Panel features:

 ◆  21 LEDs, 13 Pushbuttons, 4 Displays
 ◆  Aac, Vac, Hz, Vdc, kVA, kW, kVAr and PF indications
 ◆  BAR, Temperature, % Fuel, RPM and h-meter
 ◆  All measurements may be calibrated on field when   
      engine is running

Control Panel Bsed on BE2K-PLUS

The Be2K-PLUS integrates a 3-phase Automatic Mains Failure, an Automatic Transfer Switch controller and a Generating Set Controller. Its programming runs quickly, and all parameters and operating functions are indicated by high-performance 128X64 graphic OLED display.
The Be2K-PLUS interfaces with 5 sensors (or 4/20mA, 0/10V transmitters), a magnetic Pick-up or ’W’ (if provided on the charger alternator). Measurements include Vac, Aac, Vdc, kVA, kVar, kW, Energy, Pf, Hz, hour count, R.p.m., Oil Pressure, Engine & Auxilary Temperatures and Fuel Level. A Windows XP © compatible remote monitoring and control software program is provided. The Be2K-PLUS is SAE-J1939 compatible, features RS485, RS232 and complies with NFPA-110 and NFPA-99 specifications.